Category Archives: Instructions

Whitfield Profile 20 Pellet Stove Parts offers the complete list of parts available for the Whitfield Profile 20 and all other fine Whitfield stoves. Below is a list of parts available for the Profile 20. By clicking on any of the parts below you’ll be taken to our online shopping cart. If you don’t see what you are looking for or need help finding the right part for your stove, please email us at or call us M-F, 8-5 pacific 800-893-4950.

Part Numbers Part Description and Link

Door and Body Parts
13640075 Clip Kit, Glass Bottom
13640086 Clip Kit, Glass Right and Left Side
13640085 Clip Kit, Glass Top
14650006 Door Assembly, Firebox (with 3 Piece Glass)
61057202 Gasket Kit, Glass, 10 ft.
26M81 Gasket, Door, 3/4 in. Rope, 10 ft.
H0257 Glass, Center
H0258 Glass, Side (Order 2 if set is needed. Gasket included)
17250095 Handle Assembly, Door
14650047 Hinge Bracket
14650003 Panel, Left Side
14650048 Panel, Rear
14650004 Panel, Right Side
14650012 Panel, Top

Auger System and Electrical Parts
12046300 Auger Motor
12050011 Blower, Exhaust
12146109 Blower, Room Air, (Convection Blower) Hard Washer
16053941 Control Board
12147705 Disc, High Limit, 250 DG (L250-30F,60T21)
18150150 Fuse, Control Board, 5 Amp, 250 volt, Fast blow, 12 per pkg.
12055908 Fuse, Igniter, 6 Amp, 125 volt, Fast blow, 12pk.
13656003 Hose, Pressure Switch, 19″ (may need to be cut to size)
12140213 Igniter Probe, Replacement – Super Ignitor
H0351 Photoeye relocation Kit Serial Nos. <7495 (relocates photoeye to top of auger tube)
12058820 Power Cord, 8 feet (52L17)
16050001 Pressure Switch
16050205 Thermostat, Wall, (Thermostat Wire, part no. 16020204, is not included)
12050815 Wiring Harness
H0351 Photo Eye Flame Sensor (relocates Photoeye to top of auger tube at hopper)
11756300 Auger Shaft Kit
12051001 Bumper, Auger (5 per pkg.)
12041300 Collar and Screw Set, Auger (3 per pkg.)
20950088 Plate, Auger End (Flange)

Miscellaneous Parts
13650064 Baffle Heat Exchanger
11950068 Bracket, Hopper Lid Support
61050003 Gasket, Auger Flange
61050005 Gasket, Exhaust Blower, Fan Mount, 5 per pkg.
61050041 Gasket, Exhaust Blower, Tear Down
61050016 Gasket, Quick Disconnect
61057203 Gasket, Room Air Blower – Convection Air Blower Gasket
12151306 Handle, Damper (1/4 in. Rod and Allen Wrench)
12051409 Knob, Door (6 per pkg.)
12050093 Quick Disconnect 3 in.

Fireback and Firebrick Components
13650046 Baffle, Heat Exchange
14750014 Scraper Rod Kit, Replacement (Fits – Profile Series, Freestanding and Insert)
12055500 Tool, Grate Scraper
13640028 Clips, Brick – 2 per package
14650011 Firebrick Set

H0244 Log Set, DLS-P20
12051263 UltraGrate, Replacement

Whitfield Profile 20, Profile 30 and Cascade Plug Connections is providing instructions for the Whitfield Profile 20, Profile 30 and Whitfield Cascade pellet stoves. Today’s post will show you the plug connections for your pellet stove. These instructions are taken directly from the service manual and are provided for informational purposes only. Please click HERE for a copy of your Whitfield pellet stove manual.

Please click on the photo to enlarge for details. If you have any questions or we can be of any service, please email us at or call us at 1-800-893-4950


Whitfield Profile 20, Profile 30, Traditons and Cascade Technical Information is offering a series on instructional posts to help our customers fix their Whitfield Profile 20, Whitfield Profile 30, Whitfield Cascade, and Traditions pellet stoves. Today’s post includes some helpful information about the units and also the wiring diagram for each of the pellet stoves.

If you have ANY questions or need help finding parts for your Whitfield Profile 20, Profile 30, Cascade or Traditions pellet stoves please email us at or call us, 1-800-893-4950, and one of our certified professionals will be happy to help you troubleshoot or find parts for your stove.

The Profile 20 & 30 product lines, as well as the Cascade model, are sheet metal in construction. The Profile 20 & 30 models contain a separate motor for combustion and convection air movement. The Cascade has one motor that drives two fans on a single shaft. All models are top feed, negative pressure combustion units. The Cascade has legs, while the Profile 20 & 30 freestanding models are on a pedestal. Each model contains ash slides and an ash drawer. The Profile 20 & 30 models are fully automatic and come standard with a thermostat and wire.

The Traditions line is a metal firebox housed within a cast body. There are three-baked porcelain enamel styles. They are Mojave Sand, Hunter Green, and Ebony Black. A fourth model is painted black cast. There are two motors for air movement, the combustion motor and convection motor. The top of the appliance directs convection air down to the hearth. These all come with legs and are fully automatic, standard equipped with thermostat and wire. There are ash slides and an ash drawer. A damper control handle is located behind the ash drawer on the right side facing the appliance.

Below is the wiring diagram for the Cascade, Profile Series and Traditions pellet stoves: